2-takts Verktyg

2-takts verktyg

a    useable for engine type 447 UL, 503 UL, 582 UL 90/99/17
b    for adjustment and controll of the ignition timing.
c    to cover the crankcase.
d    to hold the oilpump gear.
e    to hold the magneto frywheel.
f     for magneto flywheel.
g    for ball bearing 6206, crankshaft magneto side.
h    for ball bearing 6207, crankshaft.
i     for ring halves.
j     for puller
k    for crankshaft P.T.O. side.
l     for crankshaft magneto side.
m   for ball bearing
447 & 503 Verktyg

a    for installation of cylinder on the piston 67,5 mm.
b    for installation of cylinder on the piston 72 mm.
c    to hold the fan.
d    for aligning of cylinders at the intake flange.
e    for crankshaft bearing P.T.O. side.
f     for positioning of crankshaft bearing P.T.O. side.
g    for centering of the stator plate.
h    for piston pin 18 mm.
i     for installation of piston pin circlip 18 mm.
j     for the engine.
582 Verktyg

a    For cylinder.
b    For cylinder exhaust flange.
c    For rotary valve shaft.
d    For ball bearing, rotary valve shaft.
e    For oil seal rotary valve shaft (without oil pump), intake side.
f     For oil seal rotary valve shaft (with oil pump), intake side.
g    For inner oil seal rotary valve shaft, water pump side.
h    To press in the rotary seal.
i     For rotary valve timing.
j     To pull out the rotary seal - the inner steel bushing of the rotary seal has to be removed before disassembly.
k    For fitting of piston pin circlip (monohook-circlip).
l     for outer oil seal rotary valve shaft, waterpump side.
Växellådsverktyg 2-takt

a    For internal hex. screw.
b    To remove the gear cover.
c    To compress the dog gear.
d    For drive gear, I= 2.00; I= 2.24; I= 2.58.
e    For oil seal part no. 850055.
f     For gearbox configuration “B”.
g    For oil seal part no. 930715.
h    For oil seal part no. 950084 and part no. 950085.
i     For oil seal part no. 933675.
j     To remove the layshaft gear.
k    To remove the flywheel.
l     For mounting the hardy disk.